Taylor Cabinet Pros
Cabinet Refacing and Refinishing in Taylor, TX
Cabinet refacing and refinishing in Taylor, TX updates doors, boxes, and finish without a full tear-out. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Taylor and nearby communities.
If your cabinet boxes are solid but the doors, finish, or hardware look dated, refacing is usually the cheaper fix. Taylor Cabinet Pros checks the box construction first. Most older Taylor homes have plywood or solid wood boxes worth keeping. We build new doors and veneer to match instead of ripping everything out.
This is a different scope than a full kitchen remodel. No layout changes, no new plumbing or electrical. Just a refreshed look on what's already there.
What's included
What's included with Cabinet Refacing and Refinishing
Typically included: new cabinet doors, veneer application on exposed box surfaces, hardware replacement, stain or paint finish coat. Optional: soft-close hinge upgrades, interior shelf replacement, crown molding addition. Customer prep: clear cabinet contents and countertops before the crew arrives, confirm door style and finish selections ahead of the install date.
Want a clearer scope?
Get a Free EstimateHow it works
How our Cabinet Refacing and Refinishing process works
Step 1Initial Inspection
We assess existing cabinets to determine refacing or refinishing needs.
Step 2Surface Preparation
Cabinet surfaces are cleaned and prepped for new materials.
Step 3Door Replacement
New doors are fitted to update the cabinet's appearance.
Step 4Veneer Application
Veneer is applied to cabinet boxes for a refreshed look.
Step 5Finish Coating
A new finish is applied to match the updated cabinet style.
Step 6Final Detailing
Hardware and trim are adjusted for a polished final result.
Materials
Materials and methods for Cabinet Refacing and Refinishing
Taylor's summer heat and swings in indoor humidity put real stress on veneer and finish adhesion, so we pick materials built to handle that movement.
Veneer Sheets
Thin wood layers used to refresh existing cabinet surfaces, matched to your box wood so seams don't telegraph.
Replacement Cabinet Doors
New doors designed to modernize the cabinet's appearance without touching the box underneath.
Wood Fillers
Material used to repair minor imperfections before refinishing, keeping old screw holes and dings from showing through.
Stain Finishes
Stains applied to achieve a renewed wood tone and texture that holds up to daily kitchen use.
Hardware Upgrades
Updated handles and knobs chosen to complete the new look and often hide old mounting holes.
Protective Topcoat
A sealant applied to protect the refinished surface from wear, splashes, and Central Texas humidity.
Questions on materials?
Get a Free EstimateTimeline
How long does a Cabinet Refacing and Refinishing take?
Refacing moves faster than a full replacement since the boxes stay in place. Here's how a typical project unfolds.
- 01
Consult and box inspection
same day - 02
Door and finish selection
3–5 days - 03
Door fabrication
1–2 weeks - 04
On-site refacing and install
2–3 days
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits and codes for Cabinet Refacing and Refinishing
Always verify specifics with your local building department before work begins.
| Typically needs a permit | Often no permit |
|---|---|
| Any work that relocates plumbing or electrical as part of the project | Door and drawer front replacement |
| Structural changes to cabinet framing or surrounding walls | Veneer application on existing boxes |
| — | Hardware swaps and refinishing |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs hiring a pro for Cabinet Refacing and Refinishing
| DIY | Hire a pro |
|---|---|
| Swapping out knobs and pulls on cabinets that already fit well | Veneer work, since uneven adhesion shows immediately and is hard to fix after the fact |
| Painting a single small cabinet or accent piece as a test run | Matching new doors to an existing box style and finish tone |
| Cleaning and re-waxing an already-finished surface | Any project involving more than a few cabinets, where consistent finish quality matters across the whole kitchen |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to call for Cabinet Refacing and Refinishing
Call Taylor Cabinet Pros for a free estimate and we'll tell you honestly which option fits your cabinets.
- Boxes are square and solid but doors are chipped, warped, or just outdated
- You want a new look without the cost and mess of a full kitchen tear-out
- Finish has worn thin from years of daily use and cleaning
- You're not sure if your cabinets are good candidates for refacing versus replacement
Seeing warning signs?
Get a Free EstimateFAQs
Cabinet Refacing and Refinishing FAQs
How much does cabinet refacing cost compared to full replacement?
Refacing typically runs less than a full replacement since the box construction and installation labor are already in place. The exact gap depends on door count and finish choice, a free estimate gives you a firm comparison for your kitchen.
How do I know if my cabinets are good candidates for refacing?
If the boxes are square, free of water damage, and solidly built (plywood or solid wood rather than failing particleboard), refacing is usually a good option. We check this during the initial inspection before recommending a path.
How long does the refinishing process take start to finish?
Most refacing projects run two to three weeks from consult to finished install, with the bulk of that time spent on door fabrication rather than on-site work.
Can you match my existing trim or cabinet style?
Matching existing trim and cabinet profiles is part of what we look at during the inspection, especially important in older Taylor-area homes with original woodwork.
Do I need to empty my kitchen during refacing?
You'll need to clear cabinet contents and countertops before the crew starts, but the kitchen stays usable between work sessions since boxes aren't being removed.
Is refacing a good option for outdated particleboard cabinets?
Not usually. If boxes are swollen, delaminating, or sagging, replacement is the better long-term investment. We'll tell you plainly if refacing isn't the right call for your cabinets.
Next step
Get a Cabinet Refacing and Refinishing estimate in Taylor
Call (737) 201-9945 or request a free estimate and we'll take a look at your cabinets before recommending refacing or replacement.
More services
Other Custom Cabinets services
Custom Kitchen Cabinets
Built-to-fit kitchen cabinets with solid wood boxes, custom sizing, and a free estimate for your Taylor-area project.
Custom Kitchen Remodels
Custom kitchen remodels in Taylor, TX, built around new cabinetry and layout changes. Free written estimates.
Built-In Shelving And Wall Units
Built-in shelving and wall units in Taylor, TX, built to match existing trim. Free estimates on custom builds.
Ask about Cabinet Refacing and Refinishing
Tell us about the project and how to reach you.